There is a 3/8" NF nut welded inside the inboard side wall of the right
chassis frame approx. beside the engine to bell housing seam. The next bolt
below the lower starter motor bolt is where the ground strap fastens to and
grounds the engine assembly. The other end of the ground strap fastens to
the chassis by way of a bolt running into this welded nut inside the frame.
Rich Chrysler
----- Original Message -----
From: "Simon & Christine Atkinson" <satkinson7314@charter.net>
To: "'Healeys'" <healeys@autox.team.net>
Sent: Sunday, April 12, 2009 10:45 PM
Subject: [Healeys] engine ground cable
> Where does the engine ground cable attach to the chassis of a BT7?
>
> thanks
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as richchrysler@quickclic.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|