healeys
[Top] [All Lists]

Re: [Healeys] Carb Bush Removal - HD6 ?? Rock Steady Idle

To: Dan Stromquist <dan@warner-associates.com>, Healey List
Subject: Re: [Healeys] Carb Bush Removal - HD6 ?? Rock Steady Idle
From: Alan Seigrist <healey.nut@gmail.com>
Date: Wed, 15 Apr 2009 16:59:17 +0200
Dan - the idle speeds up because you probably have leaking around the
throttle spindles which increases air leakage as the car warms up -
your carbs are probably running rich.  This is easily fixed by
replacing the PTFE throttle shaft sleeves on you HD8 carbs.  British
Car Specialists sell this material (uncut) or you can get them pre cut
from XKS.com.  Look up the sleeves on the XKS.com E-type carb page -
they are the same for a BJ8 as on a Series 1 or 2 E-type.

The farting probably comes from no oil in your dashpot pistons - you
have to check this every few hundred miles on your car and refill as
needed.

Alan

On 4/15/09, Dan Stromquist <dan@warner-associates.com> wrote:
> My BJ8 with HD8 carbs starts to idle faster and faster as it heats up.  It
> goes from about 500 RPM to 1000?  Any ideas why?  Also, if I pump the gas
> frequently it backfires.  My guess is I am just getting some unburnt vapors
> into the exhaust system that ignite and this is probably normal.  Anyone
> else have these problems and what was the fix?  I stopped pumping the pedal
> but still get a little fart every now and then.
> Dan
>
>
>
> -----Original Message-----
> From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
> On Behalf Of Alan Seigrist
> Sent: Wednesday, April 15, 2009 6:34 AM
> To: tomleavy@comcast.net
> Cc: Healeys@autox.team.net
> Subject: Re: [Healeys] Carb Bush Removal - HD6 ??
>
> Tom -
>
> Have you tried a PTFE bushing in there instead of bronze? HD8 carbs use PTFE
> bushings and they really make a big difference - the shafts never wear and
> it is easy for me to get a rock steady idle at all temps on my HD8s.
>
> Was thinking this might be a better, longer lasting option.
>
> http://www.mcmaster.com/#2639t7/=1gd3of
>
> I was thinking of just buying some of these, and then having them bored out
> to 5/16" at a machine shop.
>
> Alan
>
> '52 A90
> '53 BN1
> '64 BJ8
>
>
> On Tue, Mar 3, 2009 at 6:24 AM, <tomleavy@comcast.net> wrote:
>
>> Sorry, forgot to paste the link:
>>
>> http://www.chicagolandmgclub.com/driveline00/1001/jasw.html
>>
>> Tom
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as dan@warner-associates.com
>
> http://www.team.net/archive
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healey.nut@gmail.com
>
> http://www.team.net/archive
>

-- 
Sent from my mobile device

Alan

'52 A90
'53 BN1
'64 BJ8
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>