I just got this back from my son who is in the automobile paint supply
business:
The gun mentioned is what is classified as a Reduced Pressure Gun and if the
Air Quality District that one resides in allows the use of such gun, this
would be my first choice, second would be an HVLP gun
Base your gun choice on your CFM supply of the compressor
Next choice would concern fluid nozzle and needle combination....
Make sure it matches up with the product you are going to spray
(The Other) Len
Vacaville, CA, USA
1967 AH 3000 MkIII, HBJ8L39031
----- Original Message -----
From: "john spaur" <jmsdarch@sbcglobal.net>
To: <healeys@autox.team.net>
Sent: Monday, April 13, 2009 4:20 PM
Subject: [Healeys] Spray Gun recommendations
>I am looking at the DeVilBiss GFG-670 Plus gravity feed gun. It is not an
>HPLV spary gun.
>
> The literature states that "This high efficiency gravity fed gun has
> powerful atomization, and
> twice the energy available than in HVLP guns! The PLUS was designed for
> high quality production painting and it wastes less paint than standard
> HVLPs."
>
> Does anyone have experience with this spray gun? Any other
> recommendations?
>
> The primary use would be to spray primer and finish parts.
>
> My compressor delivers 8.6 CMF at 40 PSI and 6.4 CFM at 90 PSI.
>
> Thank you,
> John
> _______________________________________________
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|