healeys
[Top] [All Lists]

[Healeys] Rattling noise on hard acceleration

To: Healey Forum <healeys@autox.team.net>
Subject: [Healeys] Rattling noise on hard acceleration
From: Patrick Yoas <pyoas@yahoo.com>
Date: Wed, 29 Apr 2009 06:16:50 -0700 (PDT)
Peter,
I think I had the same problem several years ago from what you describe. I
replaced the U-Joints and it went away.
Patrick
 
Subject: [Healeys] Rattling noise on hard acceleration


My BJ7 makes a metallic-sounding rattling noise, coming more or less from
the right rear of the car when I accelerate hard pulling away from a stop
sign.  It sounds almost like I am dragging part of my exhaust system or some
piece of sheet metal is hitting a rotating part.  If I accelerate gently I
don't get the noise.  It happens mostly in first gear but occasionally in
second as well.  The car runs smoothly at parkway speeds.

I have checked:

- The drive shaft does not seem to be hitting anything.
- The exhaust system is mounted solidly and does not appear to be hitting
anything.
- I insulated the rod which links the right side hand brake lever with the
one on the left wheel where it passes through a loop on the back of the
differential.
- I insulated the brake cable casing where it contacts the spring on the
right side of the car.
- I pulled the right rear brake drum and found no loose parts.
- The rear wheels do not seem to be contacting the body of the car.

One more clue is that this noise started happening right after a made
several hard (like stand on the brakes) stops while testing my brakes last
fall.

Any ideas?

Thanks,
Peter Schauss
1963 BJ7
1980 MGB
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>