I believe do to the difference in the mating of the fiberglass transmission
cover and the 100-6 frame, modifying the original 100-6 transmission cover
to a center shift configuration is the simpler approach than trying to fit
the fiberglass cover to the 100-6 frame.
From: firstname.lastname@example.org [mailto:email@example.com]
On Behalf Of Alan Seigrist
Sent: Sunday, May 10, 2009 6:43 AM
To: I Erbs; scott willis; firstname.lastname@example.org
Subject: Re: [Healeys] 3000 engine and tranny in 100/6?
Oh right, yes you will need the fibreglass center shift tranny cover,
but otherwise it is exactly the same.
On 5/10/09, I Erbs <email@example.com> wrote:
> side shift 1006 vs center shift 63 3000
> ira erbs
> On 5/9/09, scott willis <firstname.lastname@example.org> wrote:
>> Thanks ALL!! Hopefully we'll have a new Healey soon in the area.
>> Scott Willis
>> Mashed 60 BN7 AH Club USA
>> 59 MGA
>> 66 E-Type FHC
>> BG Euro Classics Car Club President
>> Bowling Green, KY
Support Team.Net http://www.team.net/donate.html