Was the key screwed to the firwall a Wilmot Breeden Key?
On 6/7/09, Mark Schneider <mandmschneider@comcast.net> wrote:
> Listers,
>
> A question has arisen regarding the Healey factory practice with an
> extra ignition key. When I bought my 1966 BJ8 from the original owner
> I found there was a key secured to the firewall by one of the screws
> mounting the vehicle identification plate. Was this a factory
> practice or was this something possibly done by the original owner?
> Eventually, I removed the key. When I did I found the screw holding
> it was very tight, difficult to remove to gain access to the key. I
> interpreted this as an indication that the key may have been there
> since car construction and the key location was a factory practice.
> Can anyone offer information?
>
> Marks 3
> 1966 BJ8
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healey.nut@gmail.com
>
> http://www.team.net/archive
>
--
Alan
'52 A90
'53 BN1
'64 BJ8
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|