healeys
[Top] [All Lists]

[Healeys] Gearbox & Overdrive Hardware

To: healeys@autox.team.net
Subject: [Healeys] Gearbox & Overdrive Hardware
From: Mark Schneider <mandmschneider@comcast.net>
Date: Tue, 7 Jul 2009 07:55:24 -0700
Good morning list folk,

I recently completed a total gearbox and overdrive tear down, parts  
inspection and replacement as necessary, and reassembly.  After the  
system was back in the car and had 600-700 miles on it I needed to  
correct a major leak that had developed.  As a result of this second  
effort I found nearly all of the nuts and bolts on the system casework  
required re-tightening.  Having never before having tackled a project  
like a transmission overhaul I was surprised to find the fasteners had  
apparently loosened.  I had very carefully wrenched them all during  
the reassembly process with the objective of making sure all nuts/lock  
washers and bolts were as tight as they had been on disassembly.   Yet  
they all took one to two flats of re-tightening during the leak  
search.  Is this need to re-tighten transmission hardware at all  
common?  Oh yeah, leak found and fixed.

Mark 3
'66 BJ8
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>