Dick,
All the front lamps should be securely grounded through all the individual
black wire bullet connectors. These black wire bullet connectors (that need
to be ganged into double sleeve female connectors) are located to the upper
left and right where the harness goes across the front of the car just
inboard of the front wheel arches in the same immediate location as the red
parking lamp bullet connectors, the left and right turn signal wire
connectors, and the blue, blue/white and blue/red connectors for the head
lamps. See upper left of picture att'd.
These black ground wires go back into the main harness which has a number of
eyelets that are secured by screws to the chassis/body
Rich Chrysler
----- Original Message -----
From: "Dick Matson" <medlabinc@msn.com>
To: "AustinHealey List" <healeys@autox.team.net>
Sent: Tuesday, August 11, 2009 2:54 PM
Subject: [Healeys] Bj8
> Greetings:
>
> Re Bj8 what is the physical location of the ground strap screw for the
> front end turn signals/parking lights ?
>
> Dick Matson / Bj8
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as richchrysler@quickclic.net
>
> http://www.team.net/archive
[demime 1.01d removed an attachment of type image/jpeg which had a name of
jun09 004.jpg]
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|