[Healeys] Connecting rod big end housing diameter - inch to mm

[Tadeusz Malkiewicz <tadeusz.malkiewicz@plusnet.pl>]

Hello all,

There is a mistake in the Service Manual AH 100 (page D3) conversion inches
to mm in the connecting rod big end housing diameter by 0.10mm the diameter
should be 53.695-53.708 mm.  Instead it reads:

Big end housing diameter 2.114-2.114 1/2in. (53.595-53.608 mm.)

Best, Tadek
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive