Did you do it the way airplane engine assemblers do (lay a silk thread between
the two items to be joined)?
bs
--------------------------------
Bob Spidell - San Jose, CA
i have just finished taking my trans and o/d out of the bj8 to put new gaskets
in and stop the leaks. my next door neighbor owns an experimental airplane that
he built and he recommended some sealer called MotoSeal from permatex that he
uses on his airplane. i used it to put the trans and o/d together with new
gaskets, filled it with oil and let it sit for two weeks with no leaks yet.
have not driven it yet but will check everything close for leaks before i use
it anymore. i cannot find it at any autoparts store or motorcycle shop in
vegas. looked on the internet but they want to sell only cartons of six, and i
will never use that much. will give a report after driving the car a few months
to see if it is any good for the long haul. hjim
_______________________________________________
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|