healeys
[Top] [All Lists]

Re: [Healeys] Left Front Fender Needed

To: <healeys@autox.team.net>
Subject: Re: [Healeys] Left Front Fender Needed
From: "Gerald Rude" <g.rude@worldnet.att.net>
Date: Sat, 28 Nov 2009 20:28:14 -0800
Oops,  sorry, I forgot to mention its for a BJ8.....thx, jerry
  ----- Original Message -----
  From: Gerald Rude
  To: healeys@autox.team.net
  Sent: Saturday, November 28, 2009 8:27 PM
  Subject: Left Front Fender Needed


  Hello all,

  Any one have a left front fender for sale?  the only portion that needs to
be good is from the center of the fender well forward.

  Please contact me off line.

  Thanks,

  Jerry Rude
  Prather California
  g.rude@att.net
    ----- Original Message -----
    From: Gerald Rude
    To: healeys@autox.team.net
    Sent: Saturday, November 28, 2009 8:22 PM
    Subject: Inner fender to fender spacing


    Hi all,

    I'm fitting the fenders to the car, and the left inner fender well seems
to have too much space between the lip to the fender.  The fender stands at
about 1 inch.  I compared dimensions to the other side, and the fender well is
short by 1 inch. This is the side that had the big shunt, and the frame had to
be replaced from the firewall forward on this side.  Anyway, the old inner
fender well was used, but I've tried to pull it outward, and have managed
about 1/2 inch but I still have a 1 inch gap.  If I pull if further out, I
will have to reposition the upper shroud bracket on the fender well.  So my
options right now are to continue pulling, and reposition the shroud support
and possibly the inner shroud support which attaches to the inner fender well
or cut and splice in a section of sheet metal.

    Is it necessary to have a small gap, say 1/4 inch or so?  That is what the
right side has, which was never in an accident.....Or can I get by with the 1
inch gap....??

    any help much appreciated.

    Jerry Rude
    BJ8
      ----- Original Message -----
      From: Gerald Rude
      To: healeys@autox.team.net
      Sent: Friday, July 14, 2006 6:20 AM
      Subject: Desperately seeking shroud


      Hello all,

      I still am seeking (desperately) a front shroud for a BJ7/early BJ8.

      Would any of you kind souls have one hanging in their garage which may
be repairable??  Or know of anyone who may?

      Thank you so much,

      Jerry Rude
      Prather California.....
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>