Bob
The alignment tools I have used and those called up in the official tool
list do not get concerned with the spline. They work on the smallest
diameter of the clutch plate.
I have measured the ones that I use
The pilot is 0.740"
BN1 0.808"
BN2 0.915"
Regards
>
>Moss shows different clutch alignment tools for the BN1 and BN2. To be
>expected as the clutch discs are different part numbers. The pilot
>bearing is the same for both.
>
>I believe the pilot diameter is 3/4". How about the spline diameter
>and the number of splines for the BN1 and BN2 gearbox input shafts?
--
John Harper
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|