healeys
[Top] [All Lists]

Re: [Healeys] Changing the thermostat

To: awgertoo@aol.com, bspidell@comcast.net, healey.nut@gmail.com
Subject: Re: [Healeys] Changing the thermostat
From: warthodson@aol.com
Date: Sat, 16 Jan 2010 09:19:55 -0500
Another step that might be worth taking is to place the new thermostat in a
pan of water on stove burner & raise the water temperature. Monitor the
temperature with a thermometer & see if the thermostat opens at the specified
temperature. It can be very frustrating & confusing to replace a bad component
with another bad one!
Gary Hodson




-----Original Message-----
From: awgertoo@aol.com
To: bspidell@comcast.net; healey.nut@gmail.com
Cc: healeys@autox.team.net
Sent: Sat, Jan 16, 2010 7:37 am
Subject: Re: [Healeys] Changing the thermostat


Thanks everyone for the advice--I'll likely be doing this job this
fternoon so will be able to report the results quickly.  BTW one of the
tricks

ave learned along the way is to drill a small (1/16') hole in the disc  to
revent airlock and aid in refilling the block/head with coolant.

est--Michael Oritt
Healeys@autox.team.net
ttp://autox.team.net/mailman/listinfo/healeys
You are subscribed as warthodson@aol.com
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>