Thanks Rich,
I just measured the depth of my new aluminum pan.
The length from the bottom of the sump to the top of the
dipstick tube was 13 1/8" or 33 cm.
Rob
On Mar 14, 2010, at 2:52 PM, Rich C wrote:
> --------------------------------------------------
> From: "Rich C" <richchrysler@quickclic.net>
>
> Thomas, et al,
>
> I just took two measurements on a stock Hundred engine and have
> found the
> following:
>
> - total depth of stock undamaged oil pan 5 3/16" or 13.3 CM
> - length from bottom of oil sump to top of dipstick tube 13 3/4" or
> 35 CM
>
> Hope this helps,
> Rich Chrysler
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|