healeys
[Top] [All Lists]

Re: [Healeys] breather for K&N air filter

To: Oudesluys <coudesluijs@chello.nl>
Subject: Re: [Healeys] breather for K&N air filter
From: Bob Spidell <bspidell@comcast.net>
Date: Mon, 15 Mar 2010 21:10:07 +0000 (UTC)
When I went to K&N filters on my BJ8 I installed a PCV valve. Works great, and 
it eliminated most of the blue smoke I used to get after a long downhill run. 


bs 

-------------------------------- 
Bob Spidell - San Jose, CA 



Although often used this is not ideal especially on an old engine with a 
highish crank case pressure. The filter will catch the larger droplets 
but not the fine oil mist, causing an oily film around the filter, on 
top of all the oil already emitted. 
I use it on my engine as well but as soon as I have the opportunity to 
connect up to the plenum or filters I will do so. 
Kees Oudesluijs 
NL 


Don schreef: 
> Bob, 
> Remove the breather hose and install a small K&N filter directly to the "T" 
> where you removed the breather hose. APT Fast carries the K&N vent filter 
> as well as most auto parts store. www.aptfast.com K&N Filters 62-2470. 
> Don 
> 57 BN4 
_______________________________________________ 
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>