Steve,
The oval sump washers should start out life being flat, not cupped. They
become cupped by tightening down over the years.
Rich
--------------------------------------------------
From: "Stephen Hutchings" <s.hutchings@rogers.com>
Sent: Sunday, March 21, 2010 4:44 PM
To: <healeys@autox.team.net>
Subject: [Healeys] Sump bolts
> I have two silly questions about the small bolts that hold the sump on, so
> bear with me.
>
> What is the correct position for the two longer bolts?
> Should the special elongated washers be placed as if they have a spring
> action (they have a bow to them) , or should they sit the other way,
> without tension, the way they were when I took them off?
>
> Thanks,
>
> Stephen, BJ8
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/richchrysler@quickclic.net
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|