Thanks Alan,
The engine is out of the car and on it's side, so I can even reach in
through the sump if I have to.
I think it would be very awkward to do this in situ.
Stephen
>Stephen -
>
>Definitely reattach the gear to give you the leverage to spin and pull
>the cam. Once you do that it should come right out.
>
>Ideally the motor should be out of the car and you do this with the
>block upside down to guide the cam.
>
>If the motor is in the car you should drop the pan and have someone on
>the underside of the car help guide the cam out for you - it is heavy
>and you won't be able to keep it smacking the bearings if you do this
>by yourself.
>
>I'm trying to recall, can you even pull the cam out with the motor in
>the car? I think you can but I've never done it with motor in situ.
>
>Alan
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|