The tubing is available in the same OD but the problem is getting it
with the correct ID to allow the wires to be installed into the tube.
We have the correct tube available with the cut already there
avialable new.
David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767
www.britishcarspecialists.com
.
.
On Mar 27, 2010, at 8:08 PM, john spaur wrote:
> I checked the archives but was not able to answer my question.
>
> Mine is cracked a the bottom of the adjustable slot and I was
> wondering if the stator tube material a standard diameter and wall
> thickness that can be found at a steel supplier?
>
> Thank you in advance.
> John Spaur
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/
> healeydoc@sbcglobal.net
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|