I wonder if the flex sections of the down pipes could be too stiff, maybe
rusted tight. That might cause relative motion between the flanges.
Bill Lawrence
> Date: Sat, 27 Mar 2010 22:14:13 -0700
> From: bspidell@comcast.net
> To: healey.nut@gmail.com
> CC: healeys@autox.team.net
> Subject: Re: [Healeys] Arghhhhh ...
>
> Good thought, Alan. I haven't torqued them too hard--afraid of
> stripping the studs. Good idea to use a torque wrench--hadn't thought
> of that.
>
> bs
>
>
> Alan Seigrist wrote:
> > Bob -
> >
> > I don't think the nuts are supposed to be torqued all that tight, no
> > more than 30 ft-lbs. Really just enough to compress lightly and get a
> > good seal. Could this be your problem?
> >
> > Alan
> >
> >
> >
>
>
> --
> *******************************************************************
> Bob Spidell San Jose, CA bspidell@comcast.net
>
> *******************************************************************
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/ynotink@msn.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|