Hi Keith,
Does it have exactly the same number of teeth on every gear?
If it does, then you need to roll the appropriate matching gear
against the cluster to check the cut is the same.
If it makes ANY noise (usually the straight cut first) then it is a
different profile.
E.g in a series, there are A cut and B cut gears - same teeth count,
different gear profile.
I still have a huge amount of BN1/ A70/A90 gearbox bits & boxes if you
get stuck.
Call me, or email me.
Chris Dimmock
Sent from my iPhone
On 25/05/2010, at 1:54 PM, "Keith Taylor" <krtaylor@exemail.com.au>
wrote:
> Att, Guru's On a 3 speed BN1 box is a cluster # IB 3474
> interchangeable with # IB 3481 ( correct type)
>
> Keith Taylor
> WAMBERAL OZ
> BN1
> BN2........if I ever finish them
> 100M......Getting close
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
>http://autox.team.net/mailman/options/healeys/austin.healey@gmail.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|