Dead easy Allen - I've got just that in my V6 BN1 - cost me A$35.00 from
Lionel Otto Instruments here in Brizzy. Got it marked to 140mph too (but
you'll need to get the speedo recalibrated)
Cheers
Peter Linn
Brisbane Oz
BN1 Ward Spl coupe
BN1 GM V6
----- Original Message -----
From: "allen c miller jr" <acmiller@mhcable.com>
To: "Healey List" <healeys@autox.team.net>
Sent: Friday, May 28, 2010 8:55 PM
Subject: [Healeys] speedo change
> Can anyone advise whether it is possible to have a 100-4 speedo face
> fitted to
> a later model magnolia speedo that drives off the BN4. I have change my
> gearbox and rear axle to a non-overdrive BN4 tranny and differential, and
> it
> would seem easiest to simply have a 100-4 black dial speedo face fitted to
> a
> BN4 - BN7 speedometer case.
> I have a good magnolia sppedo body that is partially seized up, but I
> think
> might be restorable. Any thoughts appreciated.
>
> Allen Miller
> BN2/M
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|