healeys
[Top] [All Lists]

Re: [Healeys] Bonnet Louvers

To: Healeys <healeys@autox.team.net>, Robert Duquette
Subject: Re: [Healeys] Bonnet Louvers
From: Jim LeBlanc <jim_leblanc@yahoo.com>
Date: Fri, 1 Oct 2010 13:27:15 -0700 (PDT)
If I were doing this, and I have no intentions of doing so, I would look for a
die. First I would find somebody who does this for hot rods. My metal guy does
this work and would do the job cheaper than finding/making a die.
 
Thanks for your input
 
JIm LeBlanc
1956 100-M

--- On Fri, 10/1/10, Robert Duquette <robertduquette@sympatico.ca> wrote:


From: Robert Duquette <robertduquette@sympatico.ca>
Subject: Re: [Healeys] Bonnet Louvers
To: "Healeys" <healeys@autox.team.net>
Date: Friday, October 1, 2010, 11:23 AM


It's not a die?  I had a guy show me a die that he said was for Healey
louvers.

Robert D
> Date: Fri, 1 Oct 2010 09:49:15 -0700
> From: jim_leblanc@yahoo.com
>
> Rick,
>
> I personally like the look of louvers and enjoy engine smell coming over
the
> folded down windscreen.
>
> When you get close to this, let me know I will send pictures and/or cut out
> shapes from an original. Meanwhile simple measurements follow:
>
> length 5 inches
> opening 1/4 inches
> width 3/4 inches
>
> These seem to be standard hot rod louvers circa 1950's. Start with a slit
of
5
> inches and press it open 1/4 inches. The arcs form from streching the
metal.
>
>
> Best Regards,
>
> Jim LeBlanc
> 1956 100-M (Factory)
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/jim_leblanc@yahoo.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>