healeys
[Top] [All Lists]

[Healeys] I give up: how do I remove the differential drain plug?

To: <danny.eskenazi@gmail.com>
Subject: [Healeys] I give up: how do I remove the differential drain plug?
From: "Mr. Finespanner" <mrfinespanner@earthlink.net>
Date: Wed, 20 Oct 2010 18:57:07 -0700
Danny,
The drain plug hole is 7/16" square, not 7/8".  A regular 3/8"
drive ratchet will turn it.
regards,
Doug Reid, 18G Motorworks


>Message: 4
>Date: Wed, 20 Oct 2010 13:25:23 -0400
>From: Danny Eskenazi <danny.eskenazi@gmail.com>
>Subject: [Healeys] I give up: how do I remove the differential drain
>plug?
>To: healeys@autox.team.net
>
>Message-ID:
><AANLkTi=Wg1UYaNAsd=Rm4oC81pst8PWn7HK-zof7T=NJ@mail.gmail.com>
>Content-Type: text/plain; charset="us-ascii"
>
>Greetings,
>
>I replaced the front seal in my BT7's differential and I thought topping it
>off would be the easy part. Turns out not so! Some googling has revealed
>that it is a 7/8" square drive plug. The only advice I've seen is to make 
>my
>own tool by grinding down a 1/2" drive extension to fit. Well, I don't have
>a grinder. Surely there's an easier way? Doesn't SOMEONE make a tool for
>this?
>
>Thanks,
>
>-Danny
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>