Paul,
If it's the nut I think it is I had the same problem until I got the made
for purpose 2 13/64"
socket from AH Spares and used by impact wrench. After that it came off
like
a charm. You might be able to find or order a same size socket from your
local auto store.
Mike
On Tue, Feb 8, 2011 at 7:05 PM, PG <britishcars@shaw.ca> wrote:
> I'm trying to remove an axle nut so as to replace the seals and bearings.
>
>
>
> I have a 2 3/8" socket and try as I might, I can't get the nut to turn. In
> fact, I've damaged the but a little trying and I'm worried about rounding
> the nut and being really screwed.
>
>
>
> I don't understand why it would be so tight or difficult to take off.
>
>
>
> Any ideas
>
>
>
>
>
> Paul
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michel.murphy@gmail.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|