healeys
[Top] [All Lists]

[Healeys] Pistons

Subject: [Healeys] Pistons
From: richard.ewald at gmail.com (Richard Ewald)
Date: Mon, 21 Feb 2011 16:31:25 -0800
References: <4D62E650.9080004@gmail.com> <AANLkTikxEu5TMKYChuzK5H=E7OLs2X=Cmbhhu_NvTBHj@mail.gmail.com>
I agree with Alan. Shaving the head raises the compression as does a higher
deck height piston. Possibly a total of too much for the fuel we can buy.
$.02
Rick

Sent from my iPhone

On Feb 21, 2011, at 15:34, Alan Seigrist <healey.nut at gmail.com> wrote:

> Wayne -
>
> Standard compression is already too high for today's gas.
>
> Look for pistons that reduce compression, not increase... unless you
> plan to be racing.
>
> Alan
>
> On 2/22/11, Wayne Schultz <waschu2 at gmail.com> wrote:
>> Hi,
>>
>>           In a search for pistons for my BJ-8 rebuild I followed up on
>> a lead from Jim Wojcik and called Ross racing pistons.  They can make me
>> a nice set of modern pistons in 84mm, three ring, with a compression
>> height of 1.897 (22 thousands over stock). The stock compression height
>> is 1.875.  The cylinder head on these usually needs to be milled 10
>> thousands or so. Trying to not have the compression get to high with
>> today's gas. Anyone want to comment.
>>
>>
>>
>>                                                          Wayne
>> _______________________________________________
>> Healeys at autox.team.net
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation  $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/healeys/healey.nut at gmail.com
>>
>
> --
> Sent from my mobile device
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/richard.ewald at gmail.com

<Prev in Thread] Current Thread [Next in Thread>