the hose goes through the front opening and is clamped to the inner fender
with an approximate 1/2" to 5/8" band clamp.
On Sat, Mar 5, 2011 at 10:02 AM, <gonnagitcha90@hotmail.com> wrote:
> I just used a large wire tie to the frame as mine got too close to the
> generator.
> Richard of KY
> BN7 #440
> Sent from my Verizon Wireless BlackBerry
>
> -----Original Message-----
> From: john spaur <jmsdarch@sbcglobal.net>
> Sender: healeys-bounces@autox.team.net
> Date: Fri, 04 Mar 2011 19:02:10
> To: <healeys@autox.team.net>
> Subject: [Healeys] Blower fresh air hose
>
> The blower motor fresh air hose is not attached to the cowl/cross
> brace assembly and is just poked through the hole from what I have seen.
>
> Are people attaching the hose to the hole at the cowl? If so what is
> suggested to attach it? Is there something that I have not seen or
> that I am missing?
>
> Thank you,
> John Spaur
> '62 BT7
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/gonnagitcha90@hotmail.com
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/jwbn6hrdtp@gmail.com
>
--
jerry wall BN6
rowlett, tx
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|