healeys
[Top] [All Lists]

[Healeys] Blower fresh air hose

Subject: [Healeys] Blower fresh air hose
From: jwbn6hrdtp at gmail.com (jerry wall)
Date: Sat, 5 Mar 2011 16:52:49 -0600
References: <6.2.3.4.2.20110304185929.01ffd020@pop.att.yahoo.com> <388257719-1299340850-cardhu_decombobulator_blackberry.rim.net-2129435555-@bda895.bisx.prod.on.blackberry>
the hose goes through the front opening and is clamped to the inner fender
with an approximate 1/2" to 5/8" band clamp.

On Sat, Mar 5, 2011 at 10:02 AM, <gonnagitcha90 at hotmail.com> wrote:

> I just used a large wire tie to the frame as mine got too close to the
> generator.
> Richard of KY
> BN7 #440
> Sent from my Verizon Wireless BlackBerry
>
> -----Original Message-----
> From: john spaur <jmsdarch at sbcglobal.net>
> Sender: healeys-bounces at autox.team.net
> Date: Fri, 04 Mar 2011 19:02:10
> To: <healeys at autox.team.net>
> Subject: [Healeys] Blower fresh air hose
>
> The blower motor fresh air hose is not attached to the cowl/cross
> brace assembly and is just poked through the hole from what I have seen.
>
> Are people attaching the hose to the hole at the cowl? If so what is
> suggested to attach it? Is there something that I have not seen or
> that I am missing?
>
> Thank you,
> John Spaur
> '62 BT7
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/gonnagitcha90 at hotmail.com
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/jwbn6hrdtp at gmail.com
>



-- 
jerry wall  BN6
rowlett, tx

<Prev in Thread] Current Thread [Next in Thread>