Scott
I used a foil faced bubble product specifically manufactured for the
automotive industry called BA820 and manufactured by Reflectic Inc.
(800-879-3645 Jerry Saunders.) This product utilizes thicker aluminum
facers and a thicker core material than what can be found from other
manufacturers. I installed the product on the underside of the transmission
tunnel using double-back tape.
No financial or other connections with the manufacturer.
Ron
On Mar 27, 2011, at 9:01 AM, scott willis wrote:
> Hi folks,
> I am now ready to install a heat barrier. I was going to do it on the
cheap
> since I will have to do this twice since my car is not restored but I
decided
> to do it right. Now I am confused as to what product to buy. Does anyone
have
> a recommendation on which Dynamat product is best for the Healey interior,
how
> much I will need to buy, and where to get it?
>
> Cheers,
>
> Scott Willis
> Mashed 60 BN7 AH Club USA
> 59 MGA
> 66 E-Type FHC
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|