Rube Goldberg would be proud, Michael.
Mark
________________________________
From: Michael Oritt <michael.oritt at gmail.com>
To: John & Kerry Rowe <jkrowe46 at bigpond.net.au>
Cc: Healey List
<healeys at autox.team.net>
Sent: Thu, March 17, 2011 8:50:32 AM
Subject: Re:
[Healeys] BT7 windscreen frame
John--
I did just that on my 100. Rather
than using solid steel I used very
lightweight 1 x 19 stainless steel cable
with fittings that you can
purchase at a good marine supply and swedge on with
tools they have on hand.
I used a toggle fitting at the top and attached it in
place of the buffer
plate. The bottom end of the cable ends in a threaded
terminal which I pass
through a small hole in the scuttle just behind the
mirror, then tighten
everything down via a thumbscrew so that the top seals
absolutely tight at
speed.
Purists need not comment.
Best--Michael Oritt
I
had thought of running a stainless steel threaded rod from the centre of
> the
top frame to dashboard (as MGB??)
_______________________________________________
Healeys at autox.team.net
Donate:
http://www.team.net/donate.html
Suggested annual donation $12.75
Archive:
http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/lapierrem at sbcglobal.net
|