healeys
[Top] [All Lists]

Re: [Healeys] Clutch question

To: "'Neil Anderson'" <neilandcustom@gmail.com>
Subject: Re: [Healeys] Clutch question
From: "Skip Saunders" <tfsbj7@mindspring.com>
Date: Wed, 6 Apr 2011 16:11:07 -0400
Replace the clutch plate and do a light grind on the flywheel....otherwise
beware clutch shudder when starting uphill in first gear from a complete
stop.
-skip-



-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of Neil Anderson
Sent: Wednesday, April 06, 2011 3:36 PM
To: 'Healey'
Subject: [Healeys] Clutch question

I think I know the answer to this, but wanted to know what the list thought.
A friend is restoring  a BN2 for a customer, but this would apply to about
any car.  He is about ready to mate the gearbox and  rebuilt engine.  He has
a new clutch disk, but was thinking of using the original pressure plate.
The Healey has about 70,00 miles and the pressure plate shows little sign of
wear and no discoloration from overheating and is not warped.  Should he
also replace the pressure plate as a matter of fact?  Is an original better
material than new repros?
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>