Bill,
There are oval openings in the under dash scuttle metal that the rubber
elbows will fit into. These distribute the air flow to the demister vent
slots.
It helps if you get under the dash and look up. Another one of the many
under dash stand on your head operations, much easier done before the dash
installed.
Rich
-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at
autox.team.net]
On Behalf Of W.D. Nelson
Sent: 2011-04-27 10:27
To: healeys at autox.team.net
Subject: [Healeys] Healey Heater System
I am installing my dash and instrument panel. Take a look at Moss catalog,
p
96. The vent tubes connect to the air box with a rubber elbow. The same
rubber elbow is attached to the other end of the vent tube. To what does
that
elbow attach. On my 190 SL a similar connection obviously went into a
plastic
distribution envelope that was, in turn connected to the vent piece in the
dash. I see no such distribution piece to which the Healey vent tube
attaches. Not in any manual or in any catalog that I can find. How does
the
vent tube connect to the vent pieces in the dash top?
Thanks for the help. bill n
_______________________________________________
Healeys at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/richchrysler at quickclic.net
[demime 1.01d removed an attachment of type image/jpeg which had a name of
dec07 042.jpg]
|