healeys
[Top] [All Lists]

Re: [Healeys] Reproduction seat runners

To: Alex Hope <seven3four@hotmail.com>
Subject: Re: [Healeys] Reproduction seat runners
From: Alan Seigrist <healey.nut@gmail.com>
Date: Tue, 3 May 2011 12:22:07 +0800
Alex -

The quality is good, definitely as good as original, however the
finish is "chrome-ish" when I think it should be zinc, right?

Alan

On Tue, May 3, 2011 at 11:29 AM, Alex Hope <seven3four@hotmail.com> wrote:
> I'd be interested to know of people's experience with reproductin seat
runers.
> Are they all the same ?  Are they good quality or rubbish ? Are they good
> value at about $100 per seat ?
>
> I have the capacity to rebuild the existing ones by welding in new studs,
> re-plating and re-assembling with new bearing balls but that's a lot of
work
> and extra time off the road compared to fitting replacements.
>
> Alex Hope
> Australia
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>