Robert -
Many have had very good success with using a cut piece of coca-cola
can as a shim on the shaft.
Also, several sources also sell toothed shaft adaptors which aslo work
very well. Of course you will then have to purchase new arms if you
go this route.
Alan
On 5/11/11, Robert Memler <rmemler@gmail.com> wrote:
> My BN1 wipers fit onto a smooth knob such that when the wipers are activated
> the knob turns but the wipers stay stationary. Has anyone had this problem
> and how did you resolve it.
> Thanks, Bob Memler
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>
--
Sent from my mobile device
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|