Hi Bob,
Your BN1 wiper arms should have a split collet that fits within the base end
of the arm (instead of the usual spline) that screws down onto the smooth
shaft to lock it in place. This collet will have a chromed hex nut surface
that tightens it with a spanner.
Rich
-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at
autox.team.net]
On Behalf Of Robert Memler
Sent: 2011-05-11 10:48
To: healeys at autox.team.net
Subject: [Healeys] BN1 wipers
My BN1 wipers fit onto a smooth knob such that when the wipers are activated
the knob turns but the wipers stay stationary. Has anyone had this problem
and how did you resolve it.
Thanks, Bob Memler
_______________________________________________
Healeys at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/richchrysler at quickclic.net
|