healeys
[Top] [All Lists]

[Healeys] Rear license palte bracket on BN2

Subject: [Healeys] Rear license palte bracket on BN2
From: tadeusz.malkiewicz at gmail.com (Tadeusz Malkiewicz)
Date: Tue, 31 May 2011 09:42:16 +0200
Alan, does it bolt to the bumper or the shroud??

And which way??.. Which side faces the license plate light & which side goes
up??..

BR, Tadek

-----Original Message-----
From: Alan Seigrist [mailto:healey.nut at gmail.com] 
Sent: Tuesday, May 31, 2011 9:14 AM
To: Tadeusz Malkiewicz; healeys at autox.team.net
Subject: Re: [Healeys] Rear license palte bracket on BN2

The bracket actually bolts to the bottom of the shroud under the
bumper so that the hidden license plate light can shine on it.

On 5/31/11, Tadeusz Malkiewicz <tadeusz.malkiewicz at gmail.com> wrote:
> Hello,
>
> I have the rear license plate bracket, but I am not sure which way to
mount
> it - there are actually 4 ways to do it.
>
> Also, did the connectors sit on the outside of the car or the inside?
>
> Best, Tadek
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut at gmail.com
>

-- 
Sent from my mobile device

[demime 1.01d removed an attachment of type image/jpeg which had a name of 
License plate light bracket 1.JPG]

<Prev in Thread] Current Thread [Next in Thread>