I put it back as it was - hopefully in the right alignment. The "thicker"
side of the roller fork is facing to the front.
Gergo
2011/7/2 Dave Porter <frogeye@porterscustom.com>
> Hit or miss on the alignment, but be aware that the pump has a front and
> back side that provides clearance with the casting. Very subtle, but will
> make a mess of a good unit.
> Dave
>
> frogeye@porterscustom.com
>
> Porter Customs 2909 Arno NE
> Albuquerque, NM USA 87107
> 505-352-1378
> 1954 BN2 1959 AN5
> Porter Custom Bicycles
>
> cars:
> www.britishcarforum.com/portercustoms.html
> gallery:
> http://picasaweb.google.com/porterscustombicycles/PorterCustomBicyclesStuff
>
> GO HERE: http://porterbikes.com/ nice pictures-fun facts-my world
>
>
> -----Original Message-----
> From: healeys-bounces@autox.team.net [mailto:
> healeys-bounces@autox.team.net]
> On Behalf Of Austin Healey
> Sent: Saturday, July 02, 2011 11:13 AM
> To: Alan Seigrist
> Cc: Healey List
> Subject: Re: [Healeys] First start
>
> Hi Friends,
>
> With the most valuable help of the tech material I found on John Sim's site
> (thanks John!), I was able to understand the overdrive operation throughly,
> and soo found my problem: the oil pump has got stucked half-way down in its
> bore and only had a limited movement. Thus it supplied insufficent oil for
> the system. I have polished the piston, and voila: it is working! BTW is
> there any trick to install the pump accuratly to meet the two holes drilled
> for the two small bolts? I did it trial-and-error way, and it was quite
> time
> consuming.
>
> Have a nice sunday:
> Gergo
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|