It should be symmetrical with the right side. Measure on the right and
transfer the measurements to the left.
Bill Lawrence
> Date: Wed, 10 Aug 2011 19:31:33 -0700
> From: rrengineer.mike@att.net
> To: healeys@autox.team.net
> Subject: [Healeys] Fron A-Arm bracket location
>
> As the body of my BN2 is being finished up prior to painting, the last of
the
> welding is being done. The front left side bracket for the lower link had
to
> be replaced, but The body man welded it in the wrong place. Anyone have
any
> measurements as to where this bracket goes?
> Mike MacLean
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/ynotink@msn.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|