[Healeys] Paper gaskets

[bspidell at comcast.net (Bob Spidell)]

Yes.





OK, no more funny stuff.  My rule of thumb: two flat, machined surfaces dry is 
OK; otherwise, a little goop can't hurt.

Bob


On 9/1/2011 4:21 PM, Jonas Payne wrote:
> Have always dressed my paper gaskets with permatex
>
> Is this necessary or should the gasket be used "dry"
>
> Jonas
>

-- 
*******************************************************************
Bob Spidell           San Jose, CA            bspidell at comcast.net

*******************************************************************