healeys
[Top] [All Lists]

Re: [Healeys] lowering blocks

To: "'Bob Johnson'" <bjsbj8@gmail.com>, "'Healeys'" <healeys@autox.team.net>
Subject: Re: [Healeys] lowering blocks
From: "J. David & Lisa Caudle" <dlcaudle@morrisbb.net>
Date: Mon, 14 Nov 2011 11:41:11 -0500
I lowered my bj8 and my mechanic picked up u bolts at the NAPA store and
placed 1/2 inch (?) block in to lower. This gave the look I wanted.
Dave Caudle

-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of Bob Johnson
Sent: Monday, November 14, 2011 11:17 AM
To: Healeys
Subject: Re: [Healeys] lowering blocks

The lowering blocks that I used on my 49 Ford back in the 50s were
nothing but 1/4 in steel rectangles that any machine shop could make.
I had 4" blocks on the Ford, very extreme. I can't imagine that you
would want very much lowering though. You would probably need to get
the U-bolts fabricated as well to get the extra length.

Bob Johnson
BJ8
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/dlcaudle@morrisbb.net
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>