healeys
[Top] [All Lists]

[Healeys] non Healey fix help

Subject: [Healeys] non Healey fix help
From: michael.oritt at gmail.com (Michael Oritt)
Date: Mon, 14 Nov 2011 15:19:05 -0500
References: <CACPMnYqMWuhyrNTR_=eN_ssDZGv0=ZLZ6+KGrTR4Dei=a_Dn_g@mail.gmail.com> <1503692928.1880505.1321297366912.JavaMail.root@sz0054a.emeryville.ca.mail.comcast.net>
I just repaired the stripped threads on the magnesium differential housing
of my sportsracer using these:   www.*ezlok*.com

They're way better than using Helicoils or the like which are simply
springs--here you are actually putting new material into the metal for a
permanent fix.

Best--Michael Oritt

On Mon, Nov 14, 2011 at 2:02 PM, Bob Spidell <bspidell at comcast.net> wrote:

> Is it a machine or pipe thread? Either way, I believe there are thread
> inserts available; I'd go with that (use red threadlocker to both lock and
> seal the threads on the outside of the insert). No goop, tape, etc. is
> going to do the job (for long).
>
> Better to do it right than spring for a new transmission when the
> half-arsed 'fix' fails and you lose your fluid.
>
> Bob
>
>
> --------------------------------
> Bob Spidell - San Jose, CA
>
> ----- Original Message -----
>
>
> Howdy,
> My son and I replaced the radiator in his Aerostar Ford van, The top
> Automatic tranny line got cross threaded. Has anyone come up with a fix?
> Other than replace the radiator? Is there a product out there that you have
> used to seal the threads on a pressurized system that works.
> Thanks
>
> --
> Ira Erbs
> Portland, OR
> _______ _______
> (______ \____1960 BT7____/ _______)
> (_________________________)
> _______________________________________________
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michael.oritt at gmail.com

<Prev in Thread] Current Thread [Next in Thread>