That brings up a concern I have. In the 32 years I have owned my BJ8, the door
panels have always ended up warping shortly after installation. I put a (well
sealed) thick plastic sheet between it and the inner door each time.
I've alway wondered how a panel made of lexan or plexiglass would work----warp
or not?
Anyone else have the warping problem and if so, how did you solve it?
Thanks
tom
---- David Nock <healeydoc at sbcglobal.net> wrote:
=============
That is a water barrier to stop moisture getting to the wooden door
panel. You could use a piece of self adhesive plastic and stick it to
the door prior to installing the door panel.
David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767
www.britishcarspecialists.com
.
.
On Nov 29, 2011, at 2:34 PM, Richard Kahn wrote:
> Is the top foam inside the BJ8 door available with out changing the
> vinyl? It
> is the piece next to the window glass. Mine is getting "crunchy"
> but looks
> fine. I cannot find it in the Moss book so I don't know what to
> call it.
> Thanks
> Rich Kahn
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/
> healeydoc at sbcglobal.net
_______________________________________________
Healeys at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/tomfelts at
windstream.net
|