The original insulating paper material is available. I had Roger Moment
rebuild two of my units, not worth my time and effort to do this since
Roger has the correct tube rivets and the insulting paper.
Roger re-plates the case in zinc, paints the top piece black like original,
installs a new spring if needed and re-rivets as per original. Looks and
works like new.
Cheers,
Curt
On Thu, Dec 29, 2011 at 1:08 PM, john spaur <jmsdarch@sbcglobal.net> wrote:
> I bought a new switch however, I did replace the screw post for the
> distributor wire with the one from the old switch because the terminal
> screw is not correct on the new switches. The new rivets are too then also.
>
> John
>
> Date: Thu, 29 Dec 2011 13:56:38 -0700
>> From: I Erbs <eyera3000@gmail.com>
>>
>>
>> The terminal insulater crumbled on mine. I used thin, stiff plastic as a
>> replacement. What have others used?
>>
>> Ira Erbs
>> IT Consultant
>> Portland, OR
>>
> ______________________________**_________________
> Support Team.Net
>http://www.team.net/donate.**html<http://www.team.net/donate.html>
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
>
>http://autox.team.net/mailman/**listinfo/healeys<http://autox.team.net/mailman/listinfo/healeys>
>
> Unsubscribe/Manage: http://autox.team.net/mailman/**
>
>options/healeys/cnaarndt@**gmail.com<http://autox.team.net/mailman/options/healeys/cnaarndt@gmail.com>
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|