Charlie -
the only purpose of that pipe is to measure pressure. It only feeds
into a dead end. Go ahead a clamp it off. vise grips should do the
trick.
Alan
On Sun, Jan 8, 2012 at 9:52 AM, Charlie Frazer
<cfrazer@jcomm.uoregon.edu> wrote:
> On a drive today, a friend's oil flex pipe, the braid-covered hose leading
> from the crankcase to the oil pressure gauge tube, ruptured resulting in a
> catastrophic oil leak.
> Fortunately, we discovered the problem early and stopped and secured the
car
> after losing only several quarts of oil.
>
> We have topped up the oil, but need to move the car 4-5 miles to a location
> where we can replace the ruptured pipe.
> The break is in about the middle of the flex pipe.
>
> Can we simply clamp off the tube below (engine side of) the break with a
> hose clamp or vice grips in order to drive the car a short distance for
> repair?
>
> Thanks for your help.
> Charlie
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|