I tried sending this earlier, but it was being held for approval so I
thought I'd try it again.
If you need, or like, a real visual approach, Moss Motors made four very
nice, simple videos on valve adjustment and posted them to youtube.com.
Here's a link to the first one and then the other three will all be available
for viewing and they really show how simple this process can be.
_http://www.youtube.com/watch?v=uX07tRRPdXU_
(http://www.youtube.com/watch?v=uX07tRRPdXU)
Hope this helps also,
Steven Kingsbury
BN1
In a message dated 3/4/2012 3:18:13 A.M. Pacific Standard Time,
timwarduk at aol.com writes:
Hi Perry
Thanks for that very informative response.
So if I understand you right, given the way the Cam is constructed, it is
not necessary to be totally precise in where the cam is in its rotation so
long as the Spring is fully compressed, it is then OK to set the gap on
the
opposing rocker, e.g. 12 to 1 as in your example?
Thanks
Tim
|