healeys
[Top] [All Lists]

[Healeys] Adjusting tension steering box

Subject: [Healeys] Adjusting tension steering box
From: Josef.Eckert at t-systems.com (Josef.Eckert at t-systems.com)
Date: Mon, 28 May 2012 18:27:06 +0200
References: <C3A20D6B88C3E9458E33D84824156BEB6066966C48@HE111644.EMEA1.CDS.T-INTERNAL.COM> <4FC37071.7000004@htcnet.org> <0BFA8A62-6C09-4CE6-ADDE-B2733577E172@sbcglobal.net>
David, John,
Many thanks. The car is still with the wheels off the ground. The car is under
restoration and I have just installed the steering and links. This little drag
you mention, to my opinion it's a little too much on my car. I hesitate to
loosen the adjuster screw again as all is painted and when doing it it breaks
off the paintwork. What can happen when the drag is a little more than
necessary. Does it destroy the peg or both worm and peg?
Thanks,
Josef Eckert
Konigswinter/Germany

-----Urspr|ngliche Nachricht-----
Von: healeys-bounces at autox.team.net [mailto:healeys-bounces at 
autox.team.net] Im
Auftrag von David Nock British Car Specialists
Gesendet: Montag, 28. Mai 2012 17:18
An: John Vrugtman
Cc: healeys at autox.team.net
Betreff: Re: [Healeys] Adjusting tension steering box

You need to adjust the steering with the wheels off the ground. Jack the car
up and support on the lower control arms so there is no stress on the tie
rods. Then loosen the adjuster nut on the steering box. Then have an assistant
move the steering wheel back and forth to find the tight spot. Now either
tighten or loosen the adjuster screw until there is just a little drag in the
center position and lock the jam nut down.

David Nock
British Car Specialists
Stockton Ca

<Prev in Thread] Current Thread [Next in Thread>