Ira,
I have the same situation in that I will be soon trying to install my dash
on my BT7. I would appreciate if you would share any information you receive
with me. I'm hoping that when I try to fit it to the car that there will be
holes that line up and, therefore, make the installation very obvious. Or
maybe not. Thanks. schottc@knology.net
Regards,
Charlie Schott
-----Original Message-----
From: I Erbs
Sent: Sunday, January 20, 2013 11:05 AM
To: healeyguy@aol.com
Cc: Ahealey help
Subject: [Healeys] Bt 7 dash
All thus talk about bj8 dash got me to thinking about how I line up the
holes to attach my BT7 dash to the metal cowl?
Ira Erbs
Portland, OR
On Jan 20, 2013 9:47 AM, <healeyguy@aol.com> wrote:
> Don't forget the metal tabs that are screwed to the dash top wood bow
> about
> 1-1/2 inches from either end. They get bent under the rear of the
> shroud/cowl
> to hold the dash top down.
> Aloha
> Perry
>
>
>
> -----Original Message-----
> From: jjsandsms <jjsandsms@cs.com>
>
> Also what actually attaches the dash pad to the car. I seem as only the
> two
> crews the hold the rear-view mirror down hold it in place. It has been so
> ong since the car was assembled that I am not sure anymore. Does the
> front
> f the pad get captured by the bottom of the windshield frame? I am not to
> hat point yet.
> hanks
> eff
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/eyera3000@gmail.com
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://autox.team.net/mailman/options/healeys/schottc@knology.net
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|