healeys
[Top] [All Lists]

Re: [Healeys] Bt 7 dash

To: Charlie Schott <schottc@knology.net>
Subject: Re: [Healeys] Bt 7 dash
From: I Erbs <eyera3000@gmail.com>
Date: Wed, 23 Jan 2013 19:38:11 -0800
Cc: Ahealey help <healeys@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: healeys@autox.team.net
References: <CACPMnYr95kVKJn_v+GBzcHJ1pEBxv-bBZHQWYFVYG2yAk9u8eg@mail.gmail.com> <69DA15F74808423DB26DE601FEE45D47@CharliePC>
I got this from Perry:
Easier than the BJ8.  The demister vents have posts that pop into the
shroud.  The rear view mirror can be marked through the holes from under
the dash. That leaves just the tonneau turnbuttons.  Make a template of the
holes in the shroud and transfer to the dash pad.
Aloha
Perry
Ira Erbs
Portland, OR
   _______                                  _______
     (______ \____1960 BT7____/ _______)
         (_________________________)


On Wed, Jan 23, 2013 at 7:20 PM, Charlie Schott <schottc@knology.net> wrote:

> Ira,
>
> I have the same situation in that I will be soon trying to install my dash
> on my BT7. I would appreciate if you would share any information you
> receive with me. I'm hoping that when I try to fit it to the car that there
> will be holes that line up and, therefore, make the installation very
> obvious. Or maybe not. Thanks. schottc@knology.net
>
> Regards,
>
> Charlie Schott
>
>
> -----Original Message----- From: I Erbs
> Sent: Sunday, January 20, 2013 11:05 AM
> To: healeyguy@aol.com
> Cc: Ahealey help
> Subject: [Healeys] Bt 7 dash
>
>
> All thus talk about bj8 dash got me to thinking about how I line up the
> holes to attach my BT7 dash to the metal cowl?
>
> Ira Erbs
> Portland, OR
> On Jan 20, 2013 9:47 AM, <healeyguy@aol.com> wrote:
>
>  Don't forget the metal tabs that are screwed to the dash top wood bow
>> about
>> 1-1/2 inches from either end.  They get bent under the rear of the
>> shroud/cowl
>> to hold the dash top down.
>> Aloha
>> Perry
>>
>>
>>
>> -----Original Message-----
>> From: jjsandsms <jjsandsms@cs.com>
>>
>> Also what actually attaches the dash pad to the car.  I seem as only the
>> two
>> crews the hold the rear-view mirror down hold it in place.  It has been so
>> ong since the car was assembled that I am not sure anymore.  Does the
>> front
>> f the pad get captured by the bottom of the windshield frame?  I am not to
>> hat point yet.
>> hanks
>> eff
>> ______________________________**_________________
>> Support Team.Net 
>> http://www.team.net/donate.**html<http://www.team.net/donate.html>
>> Suggested annual donation  $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>>
>> Healeys@autox.team.net
>> http://autox.team.net/mailman/**listinfo/healeys<http://autox.team.net/mailman/listinfo/healeys>
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/**options/healeys/eyera3000@**gmail.com<http://autox.team.net/mailman/options/healeys/eyera3000@gmail.com>
>>
> ______________________________**_________________
> Support Team.Net 
> http://www.team.net/donate.**html<http://www.team.net/donate.html>
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/**listinfo/healeys<http://autox.team.net/mailman/listinfo/healeys>
>
> Unsubscribe/Manage: http://autox.team.net/mailman/**
> options/healeys/schottc@**knology.net<http://autox.team.net/mailman/options/healeys/schottc@knology.net>
_______________________________________________
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


<Prev in Thread] Current Thread [Next in Thread>