No, paint the final topcoat on all surfaces of the wheel. It will help to
reduce corrosion of the tire area of the wheel from moist air used to
inflate the tire.
Steve Byers
HBJ8L/36666
BJ8 Registry
Havelock, NC USA
-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of Paul Leeks
Sent: Thursday, May 02, 2013 8:38 AM
To: healeys@autox.team.net
Subject: [Healeys] Steel wheels again
Hi all
Having had my wheels sand-blasted, I'm about to prime them ahead of painting
them.
Am I right to assume that I should prime every surface (front, back and
inside tyre) to protect from rust, but only need to paint front and back
with the final coat?
Many thanks as always
Paul Leeks
BN4
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|