Thanks for the measurements. Looks like my car just has a short cockpit.
Dave
Sent from my iPad
On Oct 3, 2013, at 10:30 AM, Randy Hicks <Healey100M@gmail.com> wrote:
> Dave, both my BN2's measure 34" front to back, down the centerline, with
trim in place.
>
> The numbers stamped on the trim piece, 7769, would be the body number and
would indicate a BN! built in later January / early February 1955.
>
> Randy
>
> Randy Hicks
> AHCA 100 Registrar
> ahca100registrar@gmail.com
>
>
>
> On Oct 3, 2013, at 11:15 AM, Robin <retters@aol.com> wrote:
>
>> One of the rear pieces is number 7769. The other is not readable due to
>> corrosion. Both are the same however. They are not aftermarket. they fit
the
>> contours of the rear shroud fairly well but are just too long. Of course I
can
>> cut them but I am more interested in what this says about my car. How
long
>> should the cockpit be on a BN1 vs, BN2, BN4 & BN6 ?
>>
>> Dave
>>
>> Sent from my iPad
>>
>> On Oct 3, 2013, at 1:13 AM, rwil <rwil@sbcglobal.net> wrote:
>>
>>> What body numbers on the trim? In particular the rear piece. Or are
these
>> aftermarket items?
>>> -Roland
>>>
>>>
>>> Sent via the Samsung Galaxy Sb"II Skyrocketb"
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>>
>> Healeys@autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/healey100m@gmail.com
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|