Gary, I had a problem with my BJ8 overdrive sticking a few years ago,
apparently caused by using the Walmart cheap Accel brand 30W non-detergent
oil. I discovered the problem while trying to push the car backwards out of
the garage. After several tries, thinking the brakes might be stuck, there
was a "bang" and the overdrive released. When it happened again a couple
months later, I just made sure I parked where I didn't have to back up until
I had a chance to change the oil. I do not know which part in the overdrive
was "stuck", but just changing the oil solved the sticking problem.
That experience may or may not help your friend, but I provide it for what
it's worth. Otherwise, I don't know how to get it to release.
Steve Byers
HBJ8L/36666
BJ8 Registry
AHCA Delegate at Large
Havelock, NC USA
-----Original Message-----
From: Healeys [mailto:healeys-bounces@autox.team.net] On Behalf Of
warthodson@aol.com
Sent: Thursday, May 29, 2014 9:59 AM
To: healeys@autox.team.net
Subject: [Healeys] stuck in overdrive
A friend is 1.5 days from home & just called to tell me his overdrive is
stuck in the engaged position. I told him I would see if the group has any
suggestions on how to disengage it. the car is a 100 with 4 speed trans. &
OD.
My friend is an electrician so I believe we can eliminate any electrical
issues. This appears to be a mechanical/hydraulic problem. What would be the
most likely cause of this issue & is there a way to get the OD to release?
Gary Hodson
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|